Open now — 24/7 storm response St. Louis Metro & Metro East (314) 429-6000
John Beal Roofing rectangle logo in yellow and black St. Louis RoofingBy John Beal Roofing

Flat Roof Replacement Cost, at a glance

Two flat roofs of the same size can carry very different replacement prices, and the gap usually comes from what turns up during tear-off and how the roof drains. We don't price a flat roof from a satellite image. We go up, take core samples where needed, and give you a written estimate with the scope listed line by line. Inspections and estimates are free; call (314) 429-6000.

What drives the price

Size and access

Larger roofs cost more in total and often less per square foot. Tight access, taller buildings or a crane add cost.

Layers to remove

One layer comes off quickly. Two or three layers of built-up roofing or mod bit take more labor and more disposal.

Wet insulation

Saturated insulation has to go. Core cuts or a moisture survey tell us how much before we price it.

Drainage changes

Ponding often calls for tapered insulation, new drains or wider scuppers. Correcting slope adds cost and extends roof life.

Membrane choice

TPO, PVC, EPDM and modified bitumen are priced differently and suit different buildings.

Details and penetrations

HVAC curbs, parapets, skylights and pipes each need their own flashing work.

Flat commercial roof in St. Louis with membrane, drains and rooftop units that factor into replacement cost

Choosing a membrane

Each system has its place. TPO is a common pick for light-colored, heat-welded roofs on commercial buildings and some homes. PVC stands up better to restaurant exhaust and chemical exposure. EPDM is a rubber membrane with a long track record. Modified bitumen suits small residential flat roofs and additions that see foot traffic.

These are separate systems, not different names for the same thing. We'll tell you which one fits your building and why, and the estimate names the system and thickness.

Ways to keep the cost down

  • Replace before the insulation gets wet, since wet insulation is one of the largest add-ons
  • Ask whether a recover over one sound, dry layer is allowed for your roof
  • Fix drainage during the replacement instead of chasing ponding later
  • Schedule rooftop equipment work at the same time
  • Keep the new roof on a maintenance schedule
Roofing crew staging materials for a flat roof replacement on a St. Louis building

Repair, recover or replace

Not every flat roof that leaks needs a full replacement.

If the membrane is sound and the leak comes from one failed seam, a cracked pipe flashing, or a clogged drain, a repair is the right answer and we'll price it that way. If the membrane is aging across the whole roof but the insulation underneath is dry, a recover may be an option, depending on the existing layers and local code. If the insulation is wet or the roof already has two layers, a full tear-off is usually the only honest choice.

The core cuts during our inspection answer that question with evidence instead of guesswork. You'll see photos of each sample, where it was taken, and what it showed, so the recommendation is easy to follow. For building owners planning a budget, we can also give you a repair price today alongside a replacement price, so you can plan ahead.

What our flat roof estimate shows

Roof areaMeasured on site
Existing layersCounted from core cuts
InsulationDry or wet, with the amount to replace
DrainageDrains, scuppers and tapered areas noted
MembraneSystem and thickness named
WarrantyLifetime workmanship warranty plus manufacturer coverage

Questions we hear

Can you give me a price over the phone?
We can talk through what affects the price, but a number you can rely on takes a site visit. The inspection and estimate are free.
Is a recover cheaper than a tear-off?
Usually, if the existing roof is dry, only one layer thick and suitable for a recover. If moisture is trapped inside, a recover just seals the problem in.
Do you replace flat roofs on houses too?
Yes. Rear additions, porches and garages with flat roofs are a regular part of our residential work.
How long does a flat roof replacement take?
Small residential sections can be done in a day. Commercial roofs depend on size and access, and we schedule the work to limit disruption to your business.
Do you offer maintenance afterward?
Yes. Regular inspections catch open seams and blocked drains before they turn into leaks.

Free flat roof estimate

Fill this out and we'll call you back. If water is coming in right now, phone us instead so we can move faster.

No obligation and no pressure. We will call to confirm a time that works, and inspections are free. Need someone right now? Call (314) 429-6000 — a real person answers 24 hours a day.

Need A Roofer In St. Louis?

One free inspection replaces a week of guessing. Photos of the real condition and a written price, no obligation.

Call Now Free Inspection